Projects

  1. Modeling and Simulation of Electrochemically Mediated Amine Regeneration
    2. Dates: Jan 2021 – Sep 2022
    ■ Under supervision of Dr. Moalei 's Homepage
    ■ Investigated the Electrochemically Mediated Amine Regeneration method as an alternative for amine recovery in amine-based absorption carbon capture.
    ■ Developed a two-dimensional dynamic model to investigate the system's behavior.
    ■ Used COMSOL Multiphysics software to simulate the Electrochemically Mediated Amine Regeneration cell.
    ■ Investigated the system's parameters' effect on the function of the electrochemical cell.
    ■ This is the schematic diagram of the Electrochemically Mediated Amine Regeneration cell.


  2. Conceptual design of a reverse osmosis plant
    3. Dates: Jan 2021 – Feb 2021
    Project Duration: 2 mos
    ■ Under supervision of Dr. Mousavi 's Homepage
    ■ Investigated a reverse osmosis water treatment plant with a desalination capacity of 2000 m3/d.
    ■ Used GPS-X software to design the pre-purification steps to achieve a TSS concentration below 5 mg/L.
    ■ Used The WAVE software to design the reverse osmosis unit with 35 \% recovery.
    ■ Performed Economic calculations related to process by ROSA software.

    ■ This is the Process Flow Diagram (PFD) of the plant that I designed using Edraw max


    Please contact me for GPS-X and WAVE Simulation files contact

  3. Design and fabrication of a small packed bed deaerator toward scale up
    4. Dates: Nov 2019 – Sep 2020
    Project Duration: 11 mos
    ■ Under supervision of Dr. Movahedirad 's Homepage
    My key role consisted of:
    1- Reviewed and modified process design and calculation for the Deaeration process
    2- Modeled the Process
    3- Designed the pilot plant
    ■ Design and fabrication of a small packed bed deaerator toward scale up
    ■ Fourth round of Ahmadi-Roshan Project

  4. Simulation & CFD analysis of 2D-non reactive fluidized bed
    5. Dates: Aug 2020 – Sep 2020
    Project Duration: 2 mos
    ■ Under supervision of Dr. Moalei 's Homepage
    ■ Simulated the hydrodynamics of a two-dimensional non-reactive solid-gas fluidized bed by Ansys FLUENT 2019 R3 software

    ■ Contours of Volume Fraction (Air) Multiphase Simulation | ANSYS Fluent


    ■ Effect of input velocity on flow regime after 3 seconds | ANSYS Fluent


    ■ Contour of Volume Fraction (Air) of particles over time for velocity 0.8 m/s | ANSYS Fluent


    You can download my report from Here (It is in Persian)
    You can download mesh file in .msh format from Here
    Please contact me for ANSYS Fluent Simulation file in .cas format contact

  5. Conceptual design of methanol (CH3OH) production unit
    6. Dates: Oct 2018 – Jun 2019
    Project Duration: 10 mos
    ■ Under supervision of Dr. Khademi 's Homepage
    My key role consisted of:
    1- Team leader of this project.
    2- Developed BFD, PFD, and P&ID diagrams.
    3- Simulated the manufacturing process by Aspen-Hysys.
    4- Performed market analysis and economic estimation.

    ■ This is the Process Flow Diagrams (PFD) of the plant that I designed using Visio


    This plant is designed and simulated using Aspen HYSYS. Please contact me for HYSYS Simulation file contact

  6. ANSYS Fluent Projects
    7. ■ Simulation of flow in a Convergent nozzle | ANSYS Fluent
    ■ Contours of Velocity | ANSYS Fluent


    You can download mesh file in .msh format from Here

    ■ Two-dimensional turbulent flow Simulation of incompressible fluid on a flat surface with heat transfer | ANSYS Fluent
    ■ Nusselt number for a Two-dimensional turbulent incompressible flow on a flat surface with heat transfer | ANSYS Fluent


    You can download mesh file in .msh format from Here
    Please contact me for ANSYS Fluent Simulation file in .cas format contact

    ■ Simulation of Three-dimensional flow on a flat plate with Constant Area Straight Fin with heat transfer | ANSYS Fluent


    Please contact me for mesh file in .msh format contact
    Please contact me for ANSYS Fluent Simulation file in .cas format contact

    ■ Simulation of flow around the bullet after leaving the gun with heat transfer | ANSYS Fluent
    ■ Contours of Velocity around the bullet | ANSYS Fluent


    Please contact me for mesh file in .msh format contact
    Please contact me for ANSYS Fluent Simulation file in .cas format contact

  7. COMSOL Multiphysics Projects
    8. ■ Simulation of Capillary flow in a microchannel | COMSOL Multiphysics
    ■ An Electrochemical Glucose Sensing Platform
    ■ Investigated A three-dimensional channel with cylindrical obstacles



    Please contact me for COMSOL Multiphysics Simulation file contact

    ■ Simulation of Hollow Fiber Membrane Contactor for Post-Combustion Carbon Capture | COMSOL Multiphysics


    Please contact me for COMSOL Multiphysics Simulation file contact

    ■ Simulation of membrane reactor in glycerol steam reforming process| COMSOL Multiphysics


    Please contact me for COMSOL Multiphysics Simulation file contact

    ■ Simulation of membrane reactor in Propane Dehydrogenation process| COMSOL Multiphysics



    Please contact me for COMSOL Multiphysics Simulation file contact

    ■ Non-isothermal Simulation of a chemical reaction in a quartz canal | COMSOL Multiphysics


    Please contact me for COMSOL Multiphysics Simulation file contact

    ■ Simulation of heat and momentum transfer in an expander | COMSOL Multiphysics


    Please contact me for COMSOL Multiphysics Simulation file contact